Bauer P., Liu X., Liu C., Gung C., Niu E., Han Q., Ran Q., Kun L., He X., Kaverin D., Dong Y., Shu D., Yu A.
Ключевые слова: ITER, HTS, Bi2223, current leads, fabrication, control systems, central coils, coils toroidal, coils poloidal field, design parameters, test results
Ключевые слова: ITER, magnetic systems, feeder, bus bar conductor, joints, quality control, joint resistances, pressure drop, stability, test results
Mitchell N., Lee S., Yang Y., Bauer P., Taylor T., Heller R., Yamada S., Li J., Zhou T., Devred A., Ichihara T., Song Y., Huang X., Liu C., Liu C., Ballarino A., Ding K., Lu K., Gung C.Y., Spina T., Niu E., Han Q., Ran Q., Dong Y., Du Q.
Ключевые слова: ITER, current leads, HTS, coils toroidal, coils poloidal field, central coils, operational performance, design, Bi2223, tapes, prototype
Lee S., Yang Y., Bauer P., Taylor T., Zhou T., Devred A., Song Y., Gung C., Ballarino A., Ding K., Lu K., Niu E., Fernandez A.V.
Ключевые слова: ITER, current leads, design, design parameters, fabrication, prototype, HTS, Bi2223, tapes, stacked blocks, LTS, NbTi, strands, test results
Bauer P., Wang J., Li G., Zhou T., Song Y., Huang X., Clayton N., Fang L., Wang C., Liu C., Liu C., Gung C., Ding K., Lu K., Niu E., Rol, Dai Z., Gong Z., Piccin
Ключевые слова: ITER, current leads, design, fabrication, insulation, discharge characteristics, high voltage process, measurement setup, test results
Mitchell N., Kim H., Vostner A., Devred A., Clayton N., Torre A., Gung C., Laurenti A., Decool P., Doshi K., Boyer C., Huygen S., Martin B., Piccin R., Peluso B., Bale Y., Bayetti P., Bremond S., Brilleman T., Cerignat S., Dumoulin O., Fontaine A., Journeaux J., Kazuya H., Laquiere J., Michelier P., Nicolas L., Pignoly E., Tena P.
Ключевые слова: ITER, magnetic systems, review, high voltage process, insulation, discharge characteristics, feeder, bus bar conductor
Mitchell N., Kim H., Hamada K., Libeyre P., Ilyin Y., Vostner A., Devred A., Baikalov A., Lim B.S., Gung C., Turck B., Dolgetta N., Simon F., Hua Q., Gaxiola E., Koczorowski S., Carl C.
Ключевые слова: ITER, coils, joints, fabrication, design parameters, fatigue behavior, test results, joint resistances, ac losses
Li G., Devred A., Song Y., Huang X., Clayton N., Fang L., Wang C., Wang C., Liu C., Gung C., Lu K., Yu X., Niu E., Dai Z.
Ключевые слова: ITER, feeder, insulating medium, mechanical properties, fatigue behavior, test results
Ключевые слова: bus bar conductor, mechanical properties, tensile tests, laminations, test results, densification, insulating medium
Ключевые слова: ITER, feeder, bus bar conductor, high voltage process, insulating medium, friction, experimental results, resistance
Mitchell N., Kim H., Ilyin Y., Chen L., Chen Y., Devred A., Clayton N., Gung C., Ding K., Lu K., Beemsterboer C., Farek J., Wen X., Man S., Naoyuki S.
Ключевые слова: bus bar conductor, ITER, joints, design, test results, feeder, heat loads, pressure drop
Mitchell N., Koizumi N., Matsui K., Hamada K., Seo K., Hemmi T., Devred A., Alekseev A., Gung C., Harrison R., Gallix R., Jong C., Foussat A., Oliva A.B., Boyer C., Nakahira M., Gandel M., Rebollo E.B., Petit P., Journeaux J.Y., Koczorowski S., Rest M.L., Martin B., Reich J., Bellesia A.
Ключевые слова: ITER, coils toroidal, magnetic systems, LTS, Nb3Sn, winding techniques, installation, cable-in-conduit conductor, coils pancake, heat treatment, impregnation, fabrication, review
Ключевые слова: ITER, coils toroidal, cryogenic systems, cryostat, electromagnetic forces, mechanical properties, thermal loads, modeling, numerical analysis
Ключевые слова: ITER, magnetic systems, feeder, prototype, fabrication, test results, cooling technology
Ключевые слова: ITER, joints, cryogenic materials, mechanical properties, heat treatment, RRR parameter, resistivity, hardness, experimental results
Mitchell N., Chen Y., Devred A., Song Y., Huang X., Clayton N., Liu C., Gung C., Cheng Y., Ding K., Lu K., Shen G., Feng H., Yu X., Sato N., Niu E., Pierre B.
Ключевые слова: ITER, feeder, China, review, status, HTS, current leads, joints, thermal properties, shields
Mitchell N., Ilyin Y., Chen Y., Devred A., Clayton N., Beemsterboer C., Lorriere P., Farek J., Bangui G., Man S., Naoyuki S., Gung C.-.
Ключевые слова: mechanical properties, LTS, NbTi, supporting structure, joints, design, ITER, magnetic systems, bus bar conductor, feeder, stress effects
Ключевые слова: ITER, feeder, insulation, reinforcement, mechanical properties, measurement technique, stress effects, shear strength
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.